Insulated Glass Systems

/Insulated Glass Systems
Insulated Glass Systems2018-10-07T15:51:57+00:00

Your sealed unit manufacturing equipment specialists”

Canadian Equipment Sales Corp

What a savings! Limited time offer only.

Save BIG on our insulated glass manufacturing system for Dura Seal Spacer

Get all brand new equipment at a huge saving

Package includes:

A Vertical Stainless Steel glass washer with power feed in and out, auto stop, inspection lights,Built in Low e tester, low e brushes and much more. ( A Horizontal washer available at same price)

Air float application table air/ Vac, and 7 squaring rams.

A Heated roller press with speed and temperature adjustments and 5 pair of rollers.

A 4 station argon gas filling  system

 new-app-table

irenerollerpressArgon-unit1-300x225

 SPECIAL only $46,375.00  If purchased separately would cost $63,900.00

     Lease for only $999. PM oac

 

               Sealed Unit Manufacturing System for EnerEDGE or Super Spacer 

-Reduce your wait time for units and cut your costs by 50% or more

-Easy to build allowing you to control your quality and speed

-System includes a 60″ Vertical Glass washer with stainless steel in the wet area, power glass conveyors with auto stop, Low e brushes, adjustable water temperature in wash tank,and high speed drying system; (a horizontal washer is available at same price)  a  63″ X 78″ application table, with air float/ air vac top with 7 squaring rams to insure square units; a  60″ Cold Roll Press with adjustable speed and thickness; and a Hot Melt speed gunning system which includes Pump, Hose, Gun and table

-Tape dispencer system and hand tools available from tape supplier Rep

new-app-tableheatedpress1

A huge saving for a limited time only If pieces purchased separately would cost $$68,438

 Special pricing of  Only $ 47,950. or lease for only $1,022. P.M. oac.

855-669-9108     303-669-9108

New Insulated Glass System

-Easy to run system, Have your sealed units same day or night  NO WAITING

-Reduce your unit costs by 50% or more 

Uses warm edge tape spacer

-Spacer is a single part including dessicant,  shim and sealant 

System consists of;

-A Stainless Steel (  in wet areas) glass washer 60″

-and has low e brushes, heated wash water with adjustable temperature

-and has a fast drying system

air float table for ease of moving the glass.

Has 4 squaring rams for accurate placement of the top piece of glass

 A 5′ X 6′  Tape Spacer application table with a 6″ Vacuum  cup which slides back  and forth to fit the glass size.  

The table is an air float system

 Has stand to hold the reels of spacer 

new-app-tablezzz

 

Lease oac for only $958.  PM oac.

– A Heated Roller Press with 5 sets of rollers,  Handles sealed units up to 78″ X 120″

one single simple adjustments to set for different spacer sizes.  A very simple and easy to operate system.

Adjustable temperature control and speed of conveyor

 INCLUDED IS OUR WORLD FAMOUS INSTAGLASS SYSTEM WHICH ALLOWS YOU TO INSTANTLY INSTALL YOUR SEALED UNIT WITHOUT WAITING AND HAVE THE RISK OF FAILURE CAUSED BY HANDLING A GREEN UNIT BEFORE IT IS STABLE. The Instaglass system also fills the insulated glass unit with argon gas

Special for Total Package Price is only  $49,999.00  or lease for

$1,064.50 PM oac

                  

Canadian Equipment Sales Corp

303-669-9108      855-669-9108

New Small Volume Insulated Glass Manufacturing System

-This is the intro step to making quality sealed units

-Consists of one side Roller press

-Roller press system has 6 pair of heat-resisting rubber rollers

-7 Squaring rams

-Min Size unit 200 X 200 mm

-Max unit size 54″

-Automatic temperature control up to 400C

 

Priced at Only $16,950.00   Or Lease for only $377.   PM oac.

Insulated Glass Production Line

Designed for use with  metal spacer

GPL-XY1600 vertical-insulating--glass-line (1)

Spec’s

Voltage 220 volt 3 phase 60 hz

Power 26.5 kw

Max size of  glass 96″ X 130″

Min size of glass 16″ X 11″

Max. thickness of insulated glass 2 11/64

Working speed 26′ to 150′ per min

Weight 17,600 Lbs

Dimensions 74′ X 8 1/2′ X  11′

The line consists of: 

Stainless steel ( in wet areas) washer with 6 Low e brushes HD washer

Drop down spacer application table

Grid application area

Grid application area

A marrying area where the top of unit is applied to the spacer

Then run through the  roller press

then unit comes to a drop down castor table

then unit is moved to the back fill gunning table

All the electronics are brand name like Panasonic

 This automatic system can produce 600 pieces of glass in 8 hours

The system is available in 60″, 72″, 84″ and 96″ with

prices starting @ only $ 96,500.00

( lease at $ 1,995.00 PM oac   )

Going to the 96″ high unit at $ 125,900.00

Leasing available please call for current rates