GLASS EQUIPMENT

/GLASS EQUIPMENT
  • Tilt function comes with built in squaring rams; five on the bottom and two on the side.  Excellent for applying tape type spacers as well as metal spacers comes with PIB installed. The vacuum holds the glass firmly in place while the spacer is applied. The air float allows the glass to freely move about without scratching the glass. The frame is made of 2" square steel tubing and has a PVC plate. Available in two sizes Please Call for Leasing Costs.
  • Fill up to 4 units at a time. Sniffer with alarm when all four units are full.  Easy to use.  Model  ZCJ03.

    Lease for $150.

  • Part No A.G.1000. 2 station with countdown timer and automatic shut off for gas. This is a brand new item to the TGS line.
  • Maximum glass cutting size: 2000 mm x 2500 mm.  Minimum glass cutting size: 200 mm x 200 mm.  Cutting glass thickness: 3+0.38+3 ~ 10+3.04+10 mm.  Cutting efficiency 3 to 4 mins/ big piece.  Cutting error(Parallel) < 0.5 mm.  Diagonal error <1 mm.  Cutter life: 30000-50000 meters.  Workers: 1-2 person depending on the size of the glass.  Temperature and time heating: Adjust by operator. Pressure of pushing and breaking: Adjust by smc proportional control valve.

    Lease for only $1300.00

  • CNC Automatic Glass Cutting System

    $63,250.00$78,200.00
    2060 Automatic Glass cutting and loading system.  Highly integrated system which improves productivity and reduces labor and material costs.  Very automated and Intelligent us inf CNC system.  Air float to take glass in and out of cutter.  Simple to use and elegant design reduces simplified operation and management.  Low maintenance costs.  Maximum cutting size: 80" x 100".  Minimum cutting size is 4" x 4".  Cuts glass 142" x 96". Model 3624 is a larger version of this system

    Model 2620 lease for $1340

    Model 3624 lease for $1640

  • Machine was in good working condition when taken from service.  Power: 230 Volt 3 Phase.  Size: 225"long X 30"Deep  X 88" high. Glass length: 10" to 100".  Glass height: 4" to 72".  Glass thickness: 2.16mm to 4.57mm.

    Leasing available

  • Unit is a ten spindle. Manufactured in 1993.  Located in Georgia.  Owner states it is in good working condition.

    Lease for only $ 242

  • Sale!
    Designed to take the sharpness off the edges of both sides of a piece of cut glass.  There are 2 high speed emery belts set in a V to do both edges in one pass.  Perfect machine to polish insulated glass before it is assembled and also tempered glass.  Power: 220 Volts 60 Hz.  Maximum glass size is 63" x  85".  Belt size: 82" x 3.5".

    Leasing available

  • Does Edge and corner grinding of plate glass,finishing coarse grinding, fine grinding and polishing at one time.  The flat surface after polishing is close to bright and clean degree of matrix.  Glass thickness: 3 mm to 19 mm. Minimum glass processing size: 3" x 3"

    Lease for $500

  • Designed  for straight edges or 45 degree angles on flat glass.  The round grinding, polishing and angle can be completed in a procession.  The speed can be widely adjusted by the step less regulator.  The front rails can be adjusted for a variety of glass thickness from 3mm to 19mm.  Has an automated system for gripping, lubrication, steady voltage.  Glass processing size minimum: 4" x 4".  Glass processing size maximum:  120" x  120".  Glass thickness:  3 mm to 19 mm.

    Lease for $868

  • Hand winch for raising or lowering glass and suction cups.  Two heavy duty wheels for moving the glass with ease.  Front and rear wheels to provide a stable platform.  Includes two large suction cups.

    Leasing available

  • Four wheel base.  Battery powered suction system.  Raises and lowers about seven feet.  Four cup system.

    Lease Available